Open 24/7 | Call (530) 507-7415

How to Prepare Your HVAC System for Public Safety Power Shutoffs in Solano County

Handling Your Home Comfort Needs in Winters, CA

Key Takeaways

  • Know what equipment will be impacted in a PSPS event and follow manufacturer shutdown instructions to prevent damage.
  • Pre-cool indoor spaces, seal gaps around the building, and install HEPA filters to keep you comfortable and lower smoke infiltration before the power goes out.
  • Power down, label, and shut off HVAC breakers two hours prior to a shutoff. Wait for confirmed stable voltage before switching breakers back on to avoid surges.
  • Evaluate and harden backup power solutions such as portable generators or battery stations. Place generators securely outside. Prioritize powering medical equipment.
  • Build out a 48-hour, 24-hour, and 2-hour action plan with responsibilities, reminders, supplies, device charging, and communication checks.
  • Get professional HVAC inspections before wildfire season, record technician tips, and use a comprehensive restart and inspection protocol when power returns.

How to prepare your HVAC before a PSPS power shutoff in Solano County details tips for protecting your HVAC and staying comfortable during scheduled outages. It includes shutoff checks, backup power alternatives, filter and thermostat modifications, and electric and gas rudimentary safety. There are call-outs of local sources of notification and when to get moving before shutoffs. The top post details tools, easy steps and timing to abide by.

Preparation Steps

Figure out what components of your HVAC system might break or get damaged during a PSPS. Outdoor condensing units, compressors, air handlers, control boards, thermostats and zone dampers face exposure to loss of power, heat, smoke and debris. Indoor components, like furnaces and air-handling motors, experience less ventilation and more strain at startup. If you have ductwork and filters, it can carry smoke and ash into your living spaces. Mark where the components are and how to access them, so you can get to them fast before an outage.

Look back at the equipment manufacturer’s instructions for emergency shutdown and restart. Most manufacturers provide detailed safe steps for shutting down and starting up variable speed compressors, heat pumps, and electronic control modules. As usual, adhere to their torque, cycling, and wait-time recommendations or risk frying your motor or short cycling. If manuals are not handy, download PDFs from the maker’s site or reach out to service support for model-specific tips. Don’t forget to keep manufacturer contact info with your emergency plan.

Make a short checklist for protecting the system before, during, and after a PSPS.

Pre-outage items: precool spaces, set thermostats to energy-sparing modes, close vents to unused rooms, and replace filters.

During outage: switch breakers off, secure outdoor units, monitor indoor temperature and air quality, and avoid using systems on unsafe backup power without proper transfer switches.

Post-outage: inspect for debris, check condensate lines, run systems on the lowest setting first, and consult a technician if unusual noises or codes appear.

Print a copy to keep near your breaker box and save an electronic version with emergency contacts.

Collect utensils and spare parts that allow you to move quickly. Basic tools include insulated screwdrivers, a flashlight with extra batteries, utility gloves, and a non-contact voltage tester. For air quality and HVAC support, pack N95 masks, spare HEPA filters, and mastic tape for small duct leaks. Backup power options are inverter generators, battery backup stations that provide power to controls, and a transfer switch installed by a licensed electrician. Store generator fuel in labeled, ventilated containers according to local code. Test all backup systems monthly and record run times and maintenance.

Gather safety supplies and train your family. Show them how to shut off breakers safely and where to locate the system manuals. Make sure clear labels are on each breaker and on outdoor disconnects. Make contingency plans for special needs such as powering medical devices or refrigeration equipment before running the HVAC at full capacity. Need preparation steps. Practice the checklist ahead of fire season so responses are calm and orderly when a PSPS is announced.

Action Timeline

Staggered Home & HVAC Prep to Minimize Risk During a PSPS and Keep Residents Safe & Cozy

The timeline below identifies what to do when, assigns responsibility, and recommends reminder timing linked to common utility notifications. Modify steps as alarms and circumstances shift.

Forty-Eight Hours Prior

  1. Check local fire danger conditions and check your address for any fire severity zones affected by PSPS notifications. Have one person monitor official county or utility sites and a second track weather apps for wind and humidity. This provides redundancy.
  2. Start charging everything you might need such as phones, flashlights, backup batteries! Have one family member collect chargers and another check power banks. Get as close to a full charge as you can and in the case of power banks, pay attention to the mAh rating so you know your run time.
  3. Prepare by stocking up on water, snacks, and emergency kits for that long outage. Have someone verify water requirements corresponding to your household size, which is approximately one gallon daily per person. Have someone else pack non-perishable food and a small first-aid kit. Add masks and N95s if there is smoke.
  4. Go over your family’s emergency plan and make sure that everyone knows what to do if the power gets turned off. One person refreshes contact lists and another does a mini drill on meet-up locations and where the manuals, spare keys, and medical information are kept.

Reminder now, 24 hours and 2 hours prior to the shutoff expected. Utility alerts typically come 48 to 24 hours and again right before an event.

Twenty-Four Hours Prior

  1. Receive and confirm PSPS notifications and check circuits that may be impacted with the utility outage map. Designate a household lead to cross-check addresses and a support person to screenshot maps for offline use.
  2. Relocate vulnerable electronics and medical equipment to secure areas with convenient access to generator or backup power. Determine who is going to transport each of these devices and where to put them. Place them close to a charged power bank or generator if possible.
  3. Finish Those Last Minute HVAC Maintenance Tasks – filters, precooling rooms, etc. Get someone to switch filters and have your run the system to bleed the house down to a safe baseline around 22-24C before shutdown.
  4. Notify neighbors and public safety partners of actions and resource availability. Discuss plans and who could assist with elder or medical needs.

Set an alarm for two hours prior to the estimated shutoff and adjust it if the utility updates the timing.

Two Hours Prior

  1. Shut down HVAC equipment and unplug electrical breakers to avoid damage from abrupt power loss. Designate one trained adult to turn off and lock the main breaker and another to tag breakers that feed HVAC.
  2. Make sure you’ve double-checked that all windows, doors, and vents are sealed against smoke and debris. One locks up living spaces and another double-checks that sleeping areas are set.
  3. Have portable fans, purifiers, and emergency lighting readily available to use during the outage. Test lights and stash batteries with them.
  4. Make sure that everyone in your family has a cell phone or other means of communication and knows the emergency contact numbers. Make sure everyone has charged phones and a paper copy of important contacts.

Air Quality Management

Air quality is a significant issue during preemptive power shutoffs as HVAC systems could be off or at a bare minimum. Getting a jump on it minimizes health risks and smoke infiltration and helps to maintain cleaner indoor air for residents with respiratory ailments. These actionable tips arrange materials, assign areas, and establish tracking routines.

  • Identify likely smoke paths: doors, older windows, attic vents, dryer vents, and range hood openings.
  • Seal leaks with weatherstripping, caulk, or rolled towels. Store a roll of painter’s tape and plastic sheeting.
  • Assemble a kit: N95 masks (one per household member plus extras), disposable gloves, eye protection, and basic first-aid supplies.
  • Get your air quality game in order with portable HEPA purifiers and spare filters. Label units to rooms where they will be utilized.
  • Charge portable batteries, power banks, and a mini inverter for purifiers or critical fans.
  • Schedule air quality checks at least twice a day. Rely on trustworthy apps or government air monitors.
  • Keep indoor activities low that add particulates. Avoid frying, burning candles, and vacuuming without HEPA capture.
  • Have a household code or a plan to move people to the clean-air room fast if outdoor smoke spikes.
  • Point out medicines and inhalers. Throw in a convenient kit by the clean-air room.

Smoke Infiltration Control

  • Seal outside doors and windows. Lock them if you can to prevent someone from inadvertently opening them.
  • Seal window cracks with plastic and tape. Put rolled towels at the base of drafty doors.
  • Shut off the furnace or air handler intake pulling from outside when smoke is present.
  • Use window fans in exhaust mode only to avoid drawing smoke inside.
  • If possible, put MERV-13 or higher filters in any other active air handlers and seal seams.
  • Close interior doors to establish pressure zones and contain smoke.
  • Take sensitive individuals, such as newborns, seniors, and asthmatics, into predetermined clean rooms right away if smoke intensifies.

Seal vent and windows with wet towels or specific filters to trap smoke. Damp towels will impede airflow and catch larger particles, but need to be changed as soon as they are dry. Specialized vent covers or temporary filtration inserts can be more effective. Secure these to prevent gaps. Reduce use of exhaust fans that can pull outside air into the home during wildfire weather, such as bathroom and kitchen fans. If smoke levels worsen unexpectedly, take these actions: move to the clean room, run a HEPA purifier, put on N95 masks, call emergency services if breathing becomes difficult, and evacuate to a public clean-air shelter if advised.

Standalone Purifier Deployment

Deploy standalone HEPA air purifiers in common living areas as a backup for when your HVAC is not running. Choose units corresponding to your room’s square feet and position them in the middle. Run purifiers on battery or generator power if available during PSPS outages. Confirm generator circuits and inverter ratings prior to connecting. Swap purifier filters as advised to achieve peak smoke-fighting efficiency. Keep extra filters in a dry location. Put purifiers away from walls and obstacles for best air circulation and coverage. Leave at least 12 inches of clearance on all sides.

Unique Technician Insights

A short practical overview: Technicians offer field-tested steps that reduce fire risk and keep HVAC systems ready when a Public Safety Power Shutoff (PSPS) is likely. The notes below address when to book, what to inquire, what enhancements to explore and how to monitor tasks so systems stay secure and maintainable.

Schedule professional inspections of HVAC systems in advance of wildfire season and PSPS events.

Schedule checkups a few weeks prior to expected PSPS events or ahead of the wildfire season. A certified HVAC technician should run a full system check: airflow, refrigerant levels, filters, belts, motors, and thermostat controls. For package rooftop units and split systems, request a roof inspection for debris and clearances around the unit of 2 to 3 feet. If you’ve got an older system, get inspections twice a year. For newer, well-maintained units, yearly checks may be enough. Avoid inspections on days with high winds or ash fall. Blocked filters can distort results.

Ask technicians to check for vulnerabilities in wiring, circuits, and gas connections that pose a potential fire risk.

Ask for a safety blitz on electrical panels, disconnect switches, and wire harnesses. Technicians should inspect for melting, arcing, loose terminals, and corroded connections. For gas furnaces, have the tech test for leaks and flexible gas connectors, and ensure that shutoff valves turn smoothly. Have them check combustion chambers and flue paths for cracks or soot accumulations that could generate hot spots. If the tech encounters substandard wiring or overloaded circuits, obtain a written repair scheme that includes part numbers and projected life spans.

Request recommendations for surge protection and backup power integration tailored to your specific equipment.

Consider whole-house or whole-system surge protectors that are rated for your service voltage and anticipated surges. For key HVAC components, think about a dedicated surge device at the air handler and at the outside unit. If you’re planning backup power, select a solution sized to your compressor start-up current. Soft-start devices lower that demand. For generator or battery backup, check transfer switch compatibility and conduct run-through tests under load to ensure safe automatic switching. Ask for cost and runtime examples, including kilowatt needs, expected hours on a given battery bank, and fuel estimates for a generator.

Document technician advice and keep a log of completed maintenance and repairs for future reference.

Quick technician notes – just a simple log with dates, technician name, license number, work done, parts replaced, next recommended date. Store photos of wiring and serial numbers. Save receipts and warranty papers, digitally and physically. This history enables technicians to make quicker and more cautious decisions during subsequent inspections and validates claims if component failure occurs after a PSPS event.

System Restart Protocols

PSPS Restart – The best way to restart HVAC equipment after a PSPS. Start with a pause to ensure utilities and inspectors have cleared the site. Then proceed with the restart steps below. Record everything along with quirks to inform fixes or warranty requests.

Voltage Stabilization Delay

Give it 15 to 30 minutes after the utility confirms power is back on to allow voltage to settle, sometimes up to 60 minutes for known grid stress events. Check it with a handheld voltage meter at the outdoor unit disconnect or a whole-home surge monitor to verify it is consistently within manufacturer voltage tolerances, usually plus or minus 10 percent of nominal. If readings spike, pause and re-measure instead of initiating the system.

Install a quick surge protector or inline voltage monitor between the panel and the HVAC circuit if possible. These devices can shield against nasty surges while the grid is still settling. Inform everyone in the residence to not use any large appliances or high load devices, such as ovens, clothes dryers, and EV chargers, until HVAC and panel loads have been verified and checked to prevent nuisance trips and overcurrent conditions.

Note time of utility verification, meter readings, and actual wait time. Add this delay to the family emergency plan and hang instructions by the breaker panel so that anyone can execute them for future outages.

Component Inspection Sequence

Look over the outdoor unit, condenser fins, fan blades and service panels for dents, loose wires or animal nesting before powering up. Inspect the indoor air handler for water stains, mold and tight wires at the terminals. Change heavily soiled filters to avoid compressor strain on initial operation.

Remove leaves, branches, trash and dry vegetation from a three-foot radius around outdoor equipment. Clear obstructions from condensate drains and pans. A clogged drain can lead to overflow and trips once the blower starts. Sniff for burning or musty smells and listen for grinding or excessive rattling when the unit is briefly hand-spun while powered off. If there is any trace of oil, refrigerant oil stains, or hissing, that gets logged.

Expose inspection results and action plan in the table below. Navigate follow up and technician visits.

Component inspectedFindingsRequired follow-up
Outdoor unit housing & finsBent fins, minor debrisStraighten fins, clear debris
Electrical connectionsNo visible burns, one loose clampTighten clamp, recheck torque
Filters & duct openingsDirty filtersReplace filters before restart
Condensate drain & panSlow drainClear line with shop vacuum
Odors/soundsMild rattling possible fan issueSchedule tech if persists

Close breakers only after inspections and voltage checks. Turn on the thermostat to call for heat or cool and observe for error codes or abnormal noises for the initial 10 to 15 minutes. Record any faults and schedule immediate service to prevent cascading damage.

Local Support Resources

Solano County has a network of community resource centers and cooling stations that open when PSPS events occur to provide shelter, water, charging, and information. Key locations will be county community centers, libraries, and special city halls in Vallejo, Fairfield, Suisun City, Vacaville, and Benicia. These are the places with chairs, bathrooms, and sometimes medical standby nurses. Pre-book if you can, as some centers require you to pre-book or have limited space. If you are unable to travel, look for local faith organizations and community centers that frequently operate smaller, walk-in cool rooms.

Identify community resource centers and cooling stations available during PSPS outages in Solano County

County emergency services post lists of designated centers ahead of a PSPS. Check out your county’s emergency management page and local city pages for official lists and opening hours. Examples include a library in Fairfield that may open midday and remain until evening and a community college campus that might open overnight. Be mindful of capacity, pet policies, and accessibility. Please come with ID, medications, and any mobility aids. If you rely on a medical device, ensure the center can accommodate you and check if they have on-site power or a quiet backup location.

Display local support resources in a markdown table for clarity and organization

Resource typeExample locationsServices providedNotes
County cooling stationsFairfield Civic Center, Vacaville Community CenterSeating, AC, restrooms, waterMay require registration; check hours
Library-based centersVallejo Main LibraryQuiet space, Wi‑Fi, plugsLimited seating; pet rules vary
Emergency sheltersSolano County FairgroundsBasic shelter, medical triageIntended for longer outages or evacuations
Mobile assistanceRed Cross teams, CERT unitsFirst aid, referralsLocations change; track alerts
Pet-friendly sitesSelect community centersWater, shaded areasCall ahead to confirm

Share information about medical baseline allowance programs and backup power rebates for customers with disabilities or medical device needs

PG&E and other utilities provide a medical baseline allowance that reduces bills for eligible customers with certified medical needs. Enrollment needs a physician’s form and verification of residency. Utility and state programs occasionally provide rebates or low-interest financing for backup power solutions such as battery storage or standby generators. These could be state clean energy incentives that knock a flat percentage off the battery cost or local grants for low-income households. Call your utility’s customer service to find out current rebate levels, eligibility, and deadlines for applying. Save copies of approvals and serial numbers for emergency confirmation.

Distribute preparedness resources, such as outage information hotlines, PSPS alerts, and locations to view areas impacted by public safety power shutoffs

Subscribe to county and utility PSPS alerts by text, email, and phone. Among the key hotlines are the county emergency line and the utility outage line. Save these numbers and add them to phone lists. View affected areas in real time with utility outage maps and county PSPS maps. Subscribe to local support resources. Follow local social feeds for live updates. Organize a mini survival kit with printed maps, hotline numbers, and a registry of local centers so you’re not scrambling in the moment of an outage.

Conclusion

Prep work reduces risk and ensures your safety during a PSPS. Verify filters, backup power charge, and program thermostats to hold temperature. Seal cracks and utilize clean-air tools to cut smoke and dust. Be prepared for a PSPS power shutoff in Solano County. After power returns, follow the restart steps: inspect vents, run the fan, swap any wet filters, and watch for odd sounds or smells. Have your local support numbers handy, along with a PSPS kit that includes spare filters, fuses, and a charged phone pack. Little obvious things save time and money and keep your indoor air healthy. Prepare your HVAC ahead and remain cool if a shutoff strikes.

Frequently Asked Questions

How do I safely shut down my HVAC before a PSPS in Solano County?

Turn your thermostat to “off” or “fan off” and turn the system power off at the breaker. Disconnect any smart thermostats or battery backups per manufacturer. This avoids damage from sudden outages and safeguards control components.

Should I schedule a technician inspection before a planned PSPS?

Yes. A technician can verify filters, refrigerant levels, and electrical connections. They minimize the chances for post-outage failures and optimize system recovery once power resumes.

How far in advance should I prepare my HVAC for a PSPS?

Get ready 24 to 48 hours prior to the anticipated shutoff. Swap filters, lock down outside units, and record thermostat settings. This reduces air quality issues and equipment strain.

How can I manage indoor air quality during a prolonged outage?

Seal doors and windows. Operate portable HEPA purifiers on battery or generator power. Avoid indoor smoking or heavy cooking. These steps minimize particulate and smoke exposure when outdoor air quality is bad.

Is it safe to use a generator for my HVAC during a PSPS?

Only operate a generator sized and wired for HVAC loads by a licensed electrician. Incorrect usage risks equipment damage and safety hazards. Portable generators typically cannot operate whole-home systems.

What steps should I follow when power is restored?

Wait 5 to 10 minutes once power is restored. Flip the breaker and thermostat on again. Keep an eye out for strange noises, smells, or performance and call a technician if something feels off.

Where can I find local help in Solano County during a PSPS?

Reach out to Solano County emergency, your utility company, and local licensed HVAC installers. Have contact numbers and contractor credentials ready for quick assistance.

Ready for Service You Can Count On?

Contact the experts at Pearce today to schedule your next appointment!

Certified by the Best

Join Our Team

Our family-owned company hires skilled HVAC technicians who share our commitment to completing a job right the first time and adding a personal touch to every interaction with our customers. If you think you’d be a good fit, we’d love to hear from you.